Installing The Print Cylinder (Drum) - Riso MZ790U Instruction Manual

Replacing Consumables

Installing the Print Cylinder (Drum)

1
Place the Print Cylinder (Drum) on
the Rail.
Align the
with the mark on the guide, and place the Print
Cylinder (Drum) horizontally onto the guide.
Note:
• If the Print Cylinder (Drum) was manually
rotated, be sure to turn it back so that
marks align, after it is placed on the guide.
2
Return the Print Cylinder (Drum) to
its original position.
Push the Print Cylinder (Drum) in as far as it will
go, and then close the Front Cover.
224
Replacing the Print Cylinder (Drum)
mark on the Print Cylinder (Drum)
Important!:
• Do not grasp the Print Cylinder (Drum) Handle
when pushing in the Print Cylinder (Drum).
and