Scanning An Original For 1-Color Printing - Riso MZ790U Instruction Manual

Scanning an Original for 1-Color Printing

1
Select a scan mode.
See "p.23 for information about selecting a scan
mode.
2
Place the original.
See step 5 of "1-Color Printing" ("p.49).
Go to step 4 if you are not specifying folder, data,
or owner name. If no settings are configured, data
is stored by default (Data Name: scan_001, Save
Location:1_folder, Owner:Owner-1).
3
Setting data information.
Sets the data name, save location and owner
name.
"p.185
4
Setting required functions.
Set the required functions for scanning the original.
Note:
• See the previous section for the functions that
can be set.
• You can instantly check scanned data by ena-
bling "Preview".
Important!:
• Set "Format" when scanning custom-sized orig-
inals.
"p.187
To specify the original color:
!
You can specify the print color of the data you
retrieve for printing.
If a cylinder (drum) of a color differing from the
print color selected is present, a message is dis-
played.
Storage and Scan Modes (Option)
Note:
• The factory setting is [No Entry].
There is no particular need to set if printing
1-Color originals.
1)
Touch [Functions].
2)
Touch [Color].
The Color screen appears.
3)
Touch [Mono-Color].
Converting Hard-copy to Stored Data (Scan Mode)
181