Specify The Name Data To Insert - Riso MZ790U Instruction Manual

Specify the name data to insert.

Stamp data must be pre-specified from storage data.
See "p.178 for information on creating storage data.
1
Touch [Stamp Data] on the
screen.
See "p.160 for operational details of the Admin.
screen.
The Stamp Data screen appears.
2
Touch [Select Data].
The Storage Selection screen appears.
Note:
• This screen is used when Stamp data is not set.
If data is already specified, the screen from step
5 displays.
3
Touch the data to use as the
Admin.
[Stamp].
Note:
• See "p.188 for details on using the Storage
4
Confirm the storage data and touch
[Retrieve].
Note:
• See "p.190 for information about the Storage
Returns to the Stamp Data screen.
2-Color Printing with the Original and Storage Data [Stamp]
Storage and Scan Modes (Option)
Selection screen.
Retrieve screen.
195