Turning The Air Blower And Separation Fan Off [Paper Eject Adj] - Riso MZ790U Instruction Manual

Turning the Air Blower and Separation Fan
OFF
[Paper Eject Adj]
The machine normally uses an air blower and a separation fan to eject the printed paper from the cylinder (drum)
(using a jet of air). When printing flyers, etc., the air blower and/or separation fan may cause the print image to
become uneven for certain image locations and types of original, or may cause ghost images. If this occurs, you can
adjust the air blower and separation fan when printing.
Note:
• If the air blower or separation fan are turned "OFF", you may experience trouble ejecting the paper. Consult your
dealer (or authorized service representative) for further advice.
• The default "Paper Eject Adj" settings can be changed using "Admin.".
"p.161
1
Touch [Functions] on the Master
Making Basic Screen or the Print
Basic Screen.
2
Touch [Paper Eject Adj].
3
Set the [Air Blow] and [Separation
Fan].
For 2-Color printing, you can set each cylinder
(drum).
For 1-Color printing, you can only set the cylinder
(drum) being used.
4
Touch [OK].
Returns to the Functions screen. Air Blow and
Separation Fan settings are updated.

Turning the Air Blower and Separation Fan OFF [Paper Eject Adj]

Functions for Printing
123