Changing Output Directions - Riso MZ790U Instruction Manual

Basic Operations

Changing Output Directions

Output can be controlled from the Master Making/Print Basic Screens.
Master Making Basic Screen
!
• [Preview]
You can check the master making image of the page currently
awaiting creation.
Note:
• In "Preview", all received original data is displayed as a
master making image. Portions outside the print area do not
actually print.
• [Skip Page]
Cancels a pending page, and start processing the next page.
Use this button when current file has extra, unwanted pages.
• [Clear All]
Deletes all currently queued jobs. Use this button to delete a job sent by a mistake, or pending jobs no longer
needed.
Print Basic Screen
!
• [Renew Page]:
You can recreate another master when the current one is damaged without having to receive original data from
the computer.
Note:
• When 2-Color printing, you can select the cylinder (drum) on which to recreate the master. When 1-Color
printing, the current cylinder (drum) is used to recreate the master.
• When recreating masters for 2-Color printing, Cylinder (Drum) 1 and Cylinder (Drum) 2 can be switched by
selecting "Sw.Color".
• If multiple pages exist, only the last page will be processed.
• "Rotate" can also be specified.
The confirmation screen for each respective button appears when touched. Touch [OK] to implement the instruc-
tions.
Important!:
• [Skip Page] and [Clear All] are disabled during master-making or printing processes.
Press the key to modify directions while master-making or printing is in progress.
(In master-making process, the operation will stop after the master is made. In print process, the print job is halted.)
Note:
• Pressing either the
Print screens) will delete the pending job.
66
Printing from a Computer Data [Direct Print]
key or the key while waiting for a command (under Ready to Make Master/Ready to