Replacing Consumables; Check For Remaining Amount Of Consumables - Riso MZ790U Instruction Manual

Replacing Consumables

Check for Remaining Amount of
Consumables
The machine checks and reports on remaining amount of ink, master, as well as the space left in the disposal box.
Note:
• The report may not be displayed if detection fails.
• The reported amount is for reference only and may not be perfectly accurate.
1
Touch [i Info] on the Basic Screen.
2
Check for remaining amount of con-
sumables.
When running low, be sure to restock supply.
• Master ("p.215)
• Ink ("p.218)
• Master Disposal (used master) ("p.220)
214

Check for Remaining Amount of Consumables

Display Details
Indicator/Message
(Unknown),
---,
no display
Tip:
Information Button
icon on the Information Button displays cur-
rent status of the consumables as detected by the
machine.
The icon will change depending on the match-
ing information detected from the consumable.
• When matching information was correctly
retrieved from the consumable
play)
• When matching information is not available
(gray display)
When the icon is grayed, the remaining
amount of master/ink cannot be displayed.
When the master material or ink runs low,
(master) or (ink) icon blinks on the right of
the button to let you know that the item should
soon be replaced.
Note:
• If the machine is unable to retrieve matching
data from the consumable, you must enter the
correct setting value.
"p.246
Description
The black bar indicates
the remaining amount.
Ex:
approximately 10% left
Indicates that consumable
data is not available, is not
set, etc.
(normal dis-