Changing Stop Timing - Riso MZ790U Instruction Manual

Changing Stop Timing

Stop timing as set on the printer driver takes priority by default.
However, the settings can be changed on the machine while the machine is halted.
Note:
• If "Auto Print" is set to ON on the machine driver, press the
1
Touch the "Auto Print" function but-
ton.
The Auto Print screen appears.
2
Select the desired function.
• [ON]: Makes a master then automatically prints.
• [Semi-Auto(Print)]: After the data is received,
the operation stops before making a master.
• [Semi-Auto(Master)]: After a master is made
and a proof copy is printed, the operation stops.
• [Auto Process OFF]: Stops before making a
master, and then again before printing.
Note:
• See "p.62 for details regarding operations
after each stop.
key to stop the operation and to make changes.
3
Touch [OK].
The following screen appears.
Returns to Basic Screen. Auto Print setting is
updated.
Printing from a Computer Data [Direct Print]
Basic Operations
67