Consumable Information Screen - Riso MZ790U Instruction Manual

Troubleshooting

Consumable Information Screen

In order to assure optimum printing, the machine acquires information from the consumables.
If acquired matching information is not proper, the Consumable Information screen is shown.
Enter appropriate values.
The icon on the Info Button will be grayed out when this occurs.
"p.214
Note:
• Entering an inappropriate value does not affect usual operations but may result in bad print quality.
• When you perform the following operations, the values set on the "Consumables Information Input Wizard" screen
disappears and thus you need to enter the values again.
– After the power switch is set to
– After the machine is placed into the Sleep status, the
• If you are not sure the best setting for the consumables used in the machine, we may suggest that you use "1"
(default setting) except for "H1" setting and adjust from there if necessary based on the result of the printed copies.
Riso takes no responsibility, and cannot advise as to the best setting, for particular consumables not manufactured
and sold by Riso.
Ink Information Input Screen
This screen pops up when data could not be obtained from the Ink Cartridge.
Ink
Cannot Get Consumables Info
Input Values Required
Touch [OK] and enter values as shown below.
Screen Display
Consumables Information Input Wizard
Ink Information Input (Cylinder 1)
H1 Ink Color Setting
1: Black
246
When a Message Displays
(OFF), the switch is set to
OK
[H1] Ink Color Setting (for Print Cylinder
(Drum) 1)
[H7] Ink Color Setting (for Print Cylinder
(Drum) 2)
Select the same color as the Print Cylinder
2: Color
(Drum) currently in use.
Next>
(ON) again
key is pressed
Description Values
1: Black 2: Color