Making A Master That Utilizes The Maximum Printing Area [Max. Scan] - Riso MZ790U Instruction Manual

Functions for Master-Making
Making a Master that Utilizes the Maximum
Printing Area
When a master is made, automatic paper size detection and image size adjustment applies to allow appropriate print
margins. This is to prevent paper jams, and to keep internal roller free of ink stains.
By selecting "Max. Scan", maximum printing area will apply to the scanned image, regardless of the print paper size
or original document size.
Maximum Printing Area
!
MZ790: 11 7 /
16
MZ770: 11 7 /
16
Important!:
• Be sure to check the sizes of the original document and the printing paper first.
"p.14
• The 3 / " (5 mm) margin on the top cannot be scanned even in the "Max. Scan" setting.
16
• Do not use print paper smaller than the area of the image made on the master.
• The entire surface of the Stage Glass must be clean.
By scanning the maximum size, dirt found outside the original document area will also be included in the master.
This may cause the internal roller to be stained with ink.
1
Touch [Functions] on the Master
Making Basic Screen.
2
Touch [Max. Scan].
"Max. Scan" is selected.
100

Making a Master that Utilizes the Maximum Printing Area [Max. Scan]

[Max. Scan]
" × 16 " (291 mm × 425mm)
3 /
4
" × 16 " (291 mm × 413mm)
1 /
4