Enlarging/Reducing Originals [Standard Ratio] [Free] [Margin+] [Zoom] - Riso MZ790U Instruction Manual

Functions for Master-Making
Enlarging/Reducing Originals
[Standard Ratio] [Free] [Margin+] [Zoom]
The document can be printed enlarged or reduced. The following methods can be used to enlarge/reduce the origi-
nal.
Auto
!
Automatically adjusts zoom ratio to accommodate the paper size in the Paper Feed Tray.
Standard Ratio
!
Enlarging or reducing a standard-sized original (Letter, Legal, A4, B5 etc.) to print in another standard size.
Margin+
!
Reducing the original slightly. This feature is useful when allowing binding margins, or when text or diagram
extends beyond the printing area.
"p.17
Specify reduction rate of 90%-99% on the Admin. screen.
"p.162
Free
!
The top/bottom and left/right of the original can be magnified or reduced and printed as desired.
Specify the zoom ratio between 50% and 200% in increments of 1%.
Zoom
!
Allows you to specify numerical resize ratio.
Specify the zoom ratio between 50% and 200% in increments of 1%.
Note:
• Blank margins on edges are necessary in order to avoid paper jam and ink smudges on the back side. The
machine will not print without margins. The top edge in particular needs
"p.17
/ " (5 mm) wide area on the top edge (marked
3
16
regardless of enlargement or reduction settings.
• Do not position the original within
This / " (5mm) margin will remain even in the "Max. Scan" setting.
3
16
"p.100
• If the original document has no margin on its top edge, the top
gin+] is selected. Move the original about
size.
76

Enlarging/Reducing Originals [Standard Ratio] [Free] [Margin+] [Zoom]

) of the Stage Glass (or the ADF unit) cannot be scanned,
/ " (5 mm) of the top edge, or the top edge of its printed image will be cut off.
3
16
/ " (5 mm) inwards from the top edge of the stage glass and reduce the
3
16
/ " (5 mm) of margin space.
3
16
/ " (5mm) of its print will be cut off even when [Mar-
3
16