Printing Computer Data - Riso MZ790U Instruction Manual

Printing Computer Data

1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the key are off. Turn the power ON.
"p.31
• If the key is lit, the machine is in Energy
Saving mode. The machine automatically
wakes up from Energy Saving mode when data
is sent from a computer, and it starts processing
the data.
• If you are using RISORINC-NET (Option), you
can check the machine status (power ON/OFF,
paper settings, etc.) remotely from your compu-
ter monitor.
2
Check for printing paper.
Make sure paper is loaded.
To load or to change the paper, see the following
page:
"p.31
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
"p.33
3
Set printing options from your com-
puter screen.
Important!:
• Make sure to uncheck the "Collate" option in the
Print dialog box.
• When the machine has not been used for a long
period of time, the print quality may suffer due
to dry ink.
Before printing, either perform an Idling Action
("p.152) (especially when using Full Auto
mode) or press the
ies several times.
4
Click [OK] on the print dialog box.
Data is sent from the computer.
When the machine receives data, a print job auto-
matically starts in accordance with the printer
driver settings.
Continue to step 5 if you are printing in the Semi-
Auto (Print) mode or in the Manual mode.
Skip to step 7 if you are printing in the Semi-Auto
(Master) mode.
Skip to step 10 if you are printing in Full Auto.
Note:
• If the data contains multiple pages, all pages
are printed at once.
• To manually stop a job during master-making or
printing operation, press the
ter-making process, the machine will stop after
the master is made. In the printing process, the
machine will stop printing.
Press the key to resume the job.
• You can also adjust Print Position, the density,
and the speed while Print process is in
progress.
• Entering the number of copies from the Print
Quantity Keys will override the number speci-
fied in the printer driver dialog.
Printing from a Computer Data [Direct Print]
Basic Operations
key to print proof cop-
key. In mas-
63