Riso MZ790U Instruction Manual page 41

Once the masters are made, one proof copy from
Cylinder (Drum) 1 alone is printed, and the Master
Making Basic Screen for Cylinder (Drum) 2
appears.
In step 5, if two originals have been placed
together in the ADF unit, one proof copy from Cyl-
inder (Drum) 1 only is printed, and the master is
subsequently made on Cylinder (Drum) 2. Con-
tinue on to step 11.
Tip:
Auto Idling
When "Auto Idling" is set to ON, idling operations
may occur when master-making process is initi-
ated.
Factory default is set to idle automatically at the
beginning of the master-making when the
machine is inactive for over 12 hours.
To toggle "Auto Idling" ON/OFF, or to modify
number of hours before activating next idling, go
to the Admin. screen.
"p.163
Idling can also be manually initiated when making
a master.
"p.152
8
Place the original for Cylinder
(Drum) 2.
When Placing on Stage Glass
!
Remove the original for Cylinder (Drum) 1 from
the stage glass and place the original for Cylin-
der (Drum) 2 in the same way as indicated in
step 5.
When placing one original at a time
!
in the ADF unit (when [Auto
Process] is turned off)
You do not need to remove the Cylinder
(Drum) 1 original. Place the original for Cylin-
der (Drum) 2 in the same way indicated in step
5.
9
Set the print functions for the Cylin-
der (Drum) 2 original.
You can set print functions of the original for Cyl-
inder (Drum) 2 as needed.
If you make no settings, the same settings as the
first original are applied.
Note:
• The print functions that can be set for the Cylin-
der (Drum) 2 original are as shown below.
Auto Process ("p.81)
!
Making a master and printing in one pass
Image Processing mode ("p.68)
!
Selecting Image Processing mode for the
document
Scanning Contrast ("p.75)
!
Selecting Scanning Contrast for the original
Size ("p.76)
!
Enlarging/Reducing the Image
Dot Process ("p.70)
!
Applying Dot Process to photos
Tone Curve ("p.73)
!
Adjusts the gradation of a photo original.
Top Margin ("p.104)
!
Cuts the top margin of an original with a mar-
gin and creates a master.
Side Margin ("p.106)
!
Adjusts the side margins and creates a mas-
ter.
This setting is available when the ADF (Auto
Document Feeder) unit (Option) is installed.
Max. Scan ("p.100)
!
Making a master that utilizes the maximum
printing area
10
Press the
The scan of the original for Cylinder (Drum) 2
begins.
2-Color Printing with 2 Originals
Basic Operations
key.
41