Riso MZ790U Instruction Manual page 54

Basic Operations
Setting an Original with the Separation Sheet
For the "Separation Sheet", you must scan the Area Specification Sheet prior to scanning the original.
1
Place the Area Specification Sheet.
When placing on the Stage Glass
!
Place the original face down on Stage Glass.
Align center on the top edge, and close Stage
Cover.
Tip:
Using the Gauge Cover
The Gauge Cover allows you to align original
images precisely on the Stage Glass even if
they are not squared on the sheet. Shift the
original sheet along the grid lines printed on the
cover, touching it through the openings on the
cover.
Gauge Cover
54
2-Color Printing with 1 Original [Easy 2Color]
Grasp here
and lift up the
gauge cover
Place the original
face-down
When placing in the ADF unit
!
(Option)
Place originals face-down and then adjust the
ADF Original Guides to the width of the origi-
nals. Insert the originals as far into the ADF unit
as possible.
If you are using the ADF unit, you can set the
original and the Area Specification Sheet at the
same time. If you do so, place the sheet on top
of the original.
Important!:
• See "Originals" ("p.16) for the types of
paper that you can use with the ADF unit.
2
Select "Easy 2Color".
1)
Touch [Functions].
The Functions screen appears.