Creating A Trusted Application Pool And Setting The Rmx As Trusted Application - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Creating a Trusted Application Pool and Setting the

RMX as Trusted Application

To set the Polycom RMX system as a trusted host with a static route:

In the used to create a new trusted application pool, the Registrar FQDN must

be entered. If you do not know the Registrar FQDN it can be retrieved by

entering the command:

The system displays the site parameters with the following required information:

Identity and Computer - RMX FQDN

Registrar - registrar (Lync Server) FQDN

In the Administrator Lync Server Management Shell terminal, enter the

New-CsTrustedApplicationPool -Identity <FQDN> -

Registrar Registrar:<registrar FQDN> -site 1 -

ComputerFqdn <FQDN> -ThrottleAsServer $true -

TreatAsAuthenticated $true

For example if the <FQDN> is mx111.isrexchlab.local and the

<registrar FQDN> is w2008w14.isrexchlab.local the command

New-CsTrustedApplicationPool -Identity

rmx111.isrexchlab.local -Registrar

Registrar:w2008w14.isrexchlab.local -site 1 -

ComputerFqdn rmx111.isrexchlab.local -

ThrottleAsServer $true -TreatAsAuthenticated $true

For a detailed description of the New-CsTrustedApplicationPool

command, see:

http://technet.microsoft.com/en-us/library/gg425804.aspx

Polycom RMX 1500/2000/4000 Administrator's Guide

Troubleshooting

Rmx 4000 Rmx 2000