Setting the Routing for the Polycom RMX System
The New Host dialog box opens.
3
Define the following parameters:
Table H-3
New Host Parameters
Field
Name
IP Address
4
Click the Add Host button.
5
Click OK on the Add Host confirmation message and then click Done.
Polycom recommends using Lync Powershell commands to perform the
following tasks. For detailed documentation for Lync Powershell, see
http://blogs.technet.com/b/csps/.
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Enter the RMX name that will be used for its FQDN
name.
The Fully Qualified Domain Name (FQDN) is listed
accordingly using the previously defined domain
name. For example, if you have entered rmx111as
the name, the system displays
rmx111.isrexchlab.local
Enter the IP address of the RMX signaling Host.
.
as its FQDN
H-47