Mix Section And Aux Send Format; Control Room Monitor Controls - Euphonix System 5 Manual

System 5 Digital Audio Mixing System Operation Manual
Sum or Intercancel
The Sum key is inactive (not lit) by default, which means that selecting a new
source automatically cancels the previous one. When the Sum key is lit, multiple
sources can be selected simultaneously. The Sum symbol appears to the left of the first
source selected in the LCD display in the monitor controls. After selecting multiple
sources, pressing the Sum key again (so it is not lit) does not deselect theses sources
until a new source is explicitly selected. .
Follow Control Room Monitors
Activate the FlwCR key so the Mon A–D outputs follow the source selected for the
Control Room monitors.
5.1.2

Mix Section and Aux Send Format

Each Mix section also has a return that allows Bus/Tape monitoring. The returns can be
patched from the record machine's outputs using PatchNet (see Mix Bus Send/Return
on page 49). It is not possible to select a Mix section and its return at the same time;
they intercancel even in Summing mode.
Aux Sends appear in the Panel as mono or stereo pairs.
5.1.3

Control Room Monitor Controls

Press the CR Output key above the CR Source LCD to display the Control Room Out-
put Panel (Figure 5-4).
64
CM401T Master Section