Global Mode/Strip Function; Knobset Select/Punch Keys - Euphonix System 5 Manual

System 5 Digital Audio Mixing System Operation Manual
14.4.2

Global Mode/Strip Function

Assign a global automation mode to all knobset functions, the current knobset function,
or an individual parameter on the Strip:
1. Press the Write Abs key in the center section Automation Panel.
2. The Write Abs key begins flashing and the surface controls dim.
3. Assign the selected mode to the entire knobset currently on the Strip by pressing
the Knobset Select switch at the top-right of the Strip or at the top of the Strip's
function keys (Figure 14-4).
Assign the automation mode to all of the Strip's knobset parameters by pressing
the All Funcs key.
Assign the automation mode to an individual knob by pressing the knob's
Select/Punch key.
Top of Strip
4. While the Write Abs key is still flashing, other individual Strip functions can
be set to Write Absolute mode.
5. When finished, press the Write Abs key again so it stops flashing.
Knobset
Select/Punch key
Knob
Select/Punch key
Figure 14-4 Knobset Select/Punch keys
184
Dynamic Automation