Track Arming; Machine Setup Panel - Euphonix System 5 Manual

System 5 Digital Audio Mixing System Operation Manual
12.3

Track Arming

Track arming from System 5 is controlled in the Machine Setup Panel (Figure 12-5).
Press the Machine Setup button from the Main Panel. The Record in Motion,
Track Arm in Motion, On Transport Stop, and Arm While Stopped each have
two, mutually exclusive settings.
The serial port of the TT002 (v3.0x or newer software) can provide up to 48 channels of
track arming. Track arming and record tally information is sent to the console and is
used to generate a true track status tally on the surface (top of CM402T and record pad-
dles in CM403):
•
flashing = armed
•
solid = recording
Machines - Setup
Record in Motion:
Play + Rec
Track Arm in Motion:
Arm Only
On Transport Stop:
Disarm
Arm While Stopped:
Allowed
Auto Punch:
TC Lock: 200 ms
Page
Main
Panel
Name Auto
Figure 12-5 Machine Setup Panel
160
Rec Only
Arm + Rec
Stay Armed
Not Allowed
Locate
Mach
Info
Machine Control