Title Defaults; Updating Title Defaults Warning - Euphonix System 5 Manual

System 5 Digital Audio Mixing System Operation Manual
4.1.5

Title Defaults

This section describes how to set up basic PatchNet settings when a new Mixer Model
is selected. This process includes naming the device inputs and outputs and connecting
group bus outputs to multitrack inputs. The setup process is equivalent to setting and
labeling the normalled connections on a conventional patch.
These settings are stored to the Title Defaults and are automatically included with each
new Title. Each Mixer Model has a Title Defaults file. A new Title inherits these basic
settings from the Title Defaults:
•
PatchNet settings and names
•
Bus Setup: names and formats
•
Externals Setup: names and formats
•
SnapShots
•
Layouts
•
Meter setups
NOTE: While the Title Defaults is a file on the System Computer for each Mixer Model,
it does not appear in the Directory.
Setting the Title Defaults
The Title Defaults can be set by clicking the Set Title Defaults button in any of the
Directory pages in PatchNet. This copies all settings listed above from the currently
open Title into the Title Defaults for the current Mixer Model. The warning in Fi-
gure 4-6 appears to confirm this action.
Figure 4-6 Updating Title Defaults warning
39
eMix Application