Fill Region + Fill Start; Fill To Punch; Automation Performance Utilities; Preview - Euphonix System 5 Manual

System 5 Digital Audio Mixing System Operation Manual
3. Punch in, adjust the control, and punch out.
The value at the punch-out time is written to the time set for AR/End.
14.8.8

Fill Region + Fill Start

1. Set the AR/Start time.
See Section 14.8.5 - Setting Fill Start and End Times to see how to set the
times.
2. Activate Fill Start and Fill Region. Do not activate Fill End.
3. Punch in, adjust the control and punch out.
The value at the punch-out time is written to the time set for AR/Start.
14.8.9

Fill to Punch

Fill to Punch and Fill Start inter-cancel; selecting one deselects the other. Fill to
Punch behaves like Fill Region except the area is not designated prior to punching in
by setting AR/Start and AR/End times. Fill to Punch writes the value at the punch-
out time back to the punch-in time.
14.9

Automation Performance Utilities

14.9.1

Preview

Preview mode provides an easy method to set a parameter to the desired level without
recording the moves required to locate that level. When the Preview key is illuminated,
the first punch-in action (touching a fader or knob, or pressing the Select/Punch key)
punches that parameter into Preview mode. The parameter can then be adjusted and
set to the desired level. The next punch-in action punches that parameter into its
Automation mode at that level. Turning Preview off cancels any parameters with
Preview levels.
Preview mode is activated from the center section Automation Panel (Figure 14-1).
This allows previewing the move without changing the automation mode.
Suspend Preview
Suspend Preview makes it easy to record automation without removing parameters
designated for Preview. Press the Suspend Preview key so it is illuminated to display
and hear the underlying automation rather than the Preview level. The parameter will
punch in at the Preview level regardless of the state of the Suspend Preview key.
Fill
Region
Fill to
Punch
202
Dynamic Automation
Fill