Update On Locate; All Match; Auto Match - Euphonix System 5 Manual

System 5 Digital Audio Mixing System Operation Manual
14.9.6

Update on Locate

Update on Locate controls how automation values are derived when the tape is relocated
between playbacks. When active, the automation values from the new location are loaded
before beginning playback. Update on Locate should usually be active when automation
values are stable and not being edited or recorded. It is located is in Automation Panel
Page 1.
When Update on Locate is inactive, the last value used during the previous playback
for that parameter is retained at the new location prior to playback. When playback be-
gins, the current location's value (or the value derived from looking ahead or back) is
used. However, if the parameter is punched into record prior to beginning playback, the
previous setting is used. This is useful if you have experimented with setting a parameter
during the previous playback and wish to use that setting to begin another section.
14.9.7

All Match

All Match (bottom-right) punches out all parameters currently recording and glides/
snaps them back to their underlying automation value.
14.9.8

Auto Match

Auto Match automatically snaps to the underlying automation when timecode stops.
205
Dynamic Automation