Stacker Media Bin Full (Mix Size) - Lexmark W850n Manual

4024-110
Step Check
4 Perform a test print.
Does the error still occur?

Stacker media bin full (mix size)

Step Check
1 Check the stacker bin for obstructions.
Are there any obstructions on the upper and lower
parts of the stacker bin?
2 Check the sensor (stacker bin level 1) for correct
operation.
Perform the sensor (stacker bin level 1) test.
1. Enter Diagnostics mode.
2. Select FINISHER TESTS.
3. Select Sensor Tests.
4. Select Bin Level.
5. Select Stacker bin level1.
Does the display on the operator panel change every
time the sensing area of the sensor (stacker bin level 1)
is blocked by a multi page document or your finger?
3 Is the sensor (stacker bin level 1) connected properly?
4 Check the sensor (stacker bin level 2) for correct
operation.
Perform the sensor (stacker bin level 2) test.
1. Enter Diagnostics mode.
2. Select FINISHER TESTS.
3. Select Sensor Tests.
4. Select Bin Level.
5. Select Stacker bin level2.
Does the display on the operator panel change every
time the sensing area of the sensor (stacker bin level
rear) is blocked by a multi page document or your
finger?
2-94
Finisher Service Manual
Yes No
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-118.
Yes No
Remove the Go to step 2.
obstructions.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (stacker connection.
bin level 1). Go to
"Sensor
(stacker bin
level 1)
removal" on
page 4-34.
Go to step 6. Go to step 5.