Scanner Static Jam - Scan Sensor Jam - Lexmark X295 Service Manual

7541-03x
Step Action and questions
15 Check the ADF cable for continuity. Is there
continuity?
16 Replace the ADF cable. Did this fix the
problem?
17
Replace the ADF relay board. Did this fix the
issue?
18 Replace the ICC board. Did this fix the issue?

283.01 Scanner static jam - Scan sensor jam

Step Action and questions
1 Did the paper pick?
2 Is the pick roll in the up position?
3 Remove the ADF outer cover and inspect the sensors
for dirt and debris. Are the sensors clean?
4
Clean the sensor. Did this fix the issue?
5 Check the sensor (ADF Skew, and Scan sensor) for
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Observe the line "sensor (ADF Skew, and Scan
sensor)"
Does the display on the operator panel, change every
time the sensing area of the above sensor is
interrupted or blocked?
6 Check the connections along the cable from the sensor
to J1 on the ADF relay card. Are all the connections
properly connected?
7
Properly connect the connectors. Did this fix the issue?
8 Check pins 1, 4, 7, 10 for 5V and pins 3, 6, 9, 12 for
GND on connector J1 on the ADF relay card. Are they
present.
9
Replace the sensor assembly in the ADF inner cover.
Did this fix the issue?
10 Check the ADF motor assembly for proper connection
to J2 and J6 on the ADF relay card. Are the motors
properly connected?
11 Connect the cables. Did this fix the issue?
12 Replace the ADF motor assembly. Did this fix the
issue?
13 Replace the ADF relay card. Did this fix the issue?
2-30
Service Manual
Yes No
Go to step 16. Go to step 15.
Problem resolved Go to step 16.
Problem resolved Go to step 17.'
Problem resolved Replace the RIP
board. See
board removal"
on page
Yes
Go to step 10.
Go to step 3.
Go to step 5.
Problem resolved
Go to step 6.
Go to step 8.
Problem resolved
Go to step 9.
Problem resolved
Go to step 11
Problem resolved
Problem resolved
Problem resolved
Previous
Go Back
"RIP
4-73.
No
Go to step 2.
Go to step 8.
Go to step 4.
Go to step 5.
Go to step 9.
Go to step 7.
Go to step 7.
Go to step 10.
Go to step 10.
Go to step 12.
Got to step 12.
Go to step 13.
Go to step 14.
Next