Paper Jams; Paper Jams In The Finisher - Fuji Xerox Versant 3100 Press Optional Units Manual

7.5 Paper Jams

If there is a paper jam, the printing will be canceled.
The Error Message area of the touch screen will show the affected area in red, along with the message.
Also, the error lamp on the top of the machine will illuminate.
If the priority unit lamp is blinking, you must first clear the paper jam.
E10 E1
E11 E4
E12 E7
If there is a paper jam in the following area, tap the [Faults] and the [Faults] screen will appear, explaining
how to remove jammed papers.
Remove the paper only after you are sure the printer is no longer moving.

After removing jammed papers, be sure to close the cover. If you do not close the cover, occur and you will

Important
be unable to continue with the job.
Note
Leave the power on and proceed to remove jammed papers.

If there is still paper remaining, the paper jam message will continue to display. Make sure that there is no

jammed paper left and also no jams in other places.
For detailed information on how to regard the messages, refer to "1.2.1 Services Home" in the User Interface
Refer
Manual.
7.5.1

Paper Jams in the Finisher

Follow the steps below to clear paper jams in the Finisher.
E2 E3
E5 E6
E8 E9
Chapter 7 Finisher
77