Loading Scan Data Using A Pc-Based Application - Fuji Xerox DocuCentre S2010 User Manual

6 Scan

Loading Scan Data Using a PC-Based Application

This feature can be used to load scan data from a TWAIN-compatible or WIA-
compatible application installed on a computer. You can set the document load
conditions from the PC display to enable you to load the document while checking the
scan results on the Preview screen.
Note
Follow the steps below to perform the operation.
1
Place the document.
Refer to "Placing the Document" (P.102).
2
Start an application to load the scanned data.
3
From the [File] menu, select the item for selecting the scanner (source).
4
Select [FX DocuCentre S1810/S2010].
5
Change other options if needed.
Note
6
6
Click [Scan].
106
• Install the scan driver to use this function. For information on how to install the scan driver,
refer to "Installing the Scan Driver" (P.45).
• The items you can set will vary according to the TWAIN-compatible and WIA-compatible
applications you are using.
• The supported applications are 32-bit only.
• For information on the Scan
functions, click [Help] in the
screen to display the Help
Information.