Scanning From The Operator Panel - Scan To Pc - Fuji Xerox DocuPrint CM405 df User Manual

 Scanning From the Operator Panel - Scan to PC
The following procedure uses Windows 7 as an example.
NOTE:
• This feature cannot be used when the printer is connected to a network.
• Ensure that the printer is connected to the computer via the USB cable.
• This feature is supported on both Windows and Mac OS X.
1
Load the document(s) face up with top edge in first into the duplex automatic document feeder (DADF).
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the DADF" on page 193
• "Making Copies From the Document Glass" on page 191
2
Press the (Services) button.
3
Select Scan to.
4
Select PC.
5
Specify scan options such as Output Color, Resolution, 2 Sided Scanning, and File Format on the
Scan to PC, Quality and Options tabs.
6
Press the (Start) button.
The selected application window opens on your computer.
NOTE:
• If the following dialog box appears on your computer, select DocuPrint CM405 df Express Scan Manager, and then
click OK.
NOTE:
• Once you select the Always use this program for this action check box when selecting DocuPrint CM405 df Express
Scan Manager, the selected application is automatically used without displaying the program selection window.
• You must use Express Scan Manager on your computer to change the settings for scanning. For details, see
Manager" on page 86.
• For Mac OS X, the dialog box for selecting a program is not displayed.
"Express Scan
209
Scanning