Removing Ink Holder (I/H) Cover - MUTOH ValueJet 1304 Service Manual

VJ-1304 Maintenance Manual
4.2.4

Removing Ink Holder (I/H) Cover

NOTE
Before removing the ink holder (I/H) cover, remove the following parts.
• R side cover: "4.2.1 Removing R Side Cover" p.4-6
1. Remove the ink cartridge.
2. Remove the I/H cover rear screw (tapping screw M4
1
3. Remove the scroller receiver.
"4.2.9 Removing Scroller Receiver (L, R)" p.4-16
4. Remove the I/H cover side (scroller receiver side) screw (tapping screw M4
1).
1
5. Remove the I/H cover.
6. To reassemble the unit, reverse the removal procedure.
CS9050, CS9150
2
2
4-11
×
8, S tight cup: 2).
No. Part name
1 I/H cover
2 I/H cover screw
(tapping screw M4
×
12, P tight binding black:
No. Part name
1 I/H cover
2 I/H cover side screw
(tapping screw M4
binding black)
4 Parts Replacement
×
8, S tight cup)
×
12, P tight
Rev.-01