Removing Ink Holder (I/H) Cover - MUTOH ValueJet Service Manual

ValueJet 1304 Service manual
4.2.4

Removing Ink Holder (I/H) Cover

NOTE
Before removing the ink holder (I/H) cover, remove the following parts.
• R side cover:
1. Remove the ink cartridge.
2. Remove the I/H cover rear screw (tapping screw M4
1
3. Remove the scroller receiver.
"4.2.9 Removing Scroller Receiver (L, R)" p.4-18
4. Remove the I/H cover side (scroller receiver side) screw (tapping screw M4
1).
1
"4.2.1 Removing R Side Cover" p.4-6
2
2
×
8, S tight cup: 2).
表 4-9
No.
1 I/H cover
2 I/H cover screw
(tapping screw M4
表 4-10
No.
1 I/H cover
2 I/H cover side screw
(tapping screw M4
binding black)
4-13
Part name
×
8, S tight cup)
×
12, P tight binding black:
Part name
×
12, P tight
AP-74109 Rev 1.1