MUTOH ValueJet 1304 Service Manual page 159

VJ-1304 Maintenance Manual
1. Remove the screws (round head spring screw finishing M4
plate on the right of the inside chassis.
1
3
2. Detach the chain from the sprocket large.
3. Remove the screws (round head spring screw finishing M4
motor mounting plate.
3
1
4. Remove the bearings.
5. Replace the VJ take up unit motor assembly.
6. To reassemble the unit, reverse the removal procedure.
CS9050, CS9150
2
2
1
2
2
4-111
4 Parts Replacement
×
10: 3 pieces) that retain the motor mounting
No. Part name
1 Motor mounting plate
2 Screws that retain the motor
mounting plate (round head
spring screw finishing M4
3 pieces)
3 Right of the inside chassis
No. Part name
1 Sprocket large
2 Chain
×
6:2 pieces) that retain the axis holder on the
No. Part name
1 Axis holder
2 Screws that retains the axis
holder (round head spring screw
×
finishing M4
3 Motor mounting plate
×
10:
6)
Rev.-01