Sending Parameters - MUTOH ValueJet 1304 Service Manual

7 Adjustment
7.3.6

Sending Parameters

NOTE
Before sending parameters, perform the following work.
• Receiving parameters:
• Firmware installation:
NOTE
The extension of parameter file is "*.prm"
.
1. Click [Parameter Send] on the main window.
2. When the "Select of send parameter file"
window opens, select the parameter file to be
transferred and click [Open].
* Click [Cancel] to return to the main window.
3. In the "Parameter Send check" window, click
[OK] to start sending.
* Click [Cancel] to return to the main window.
Rev.-01
CS9050, CS9150
"7.3.4 Receiving Parameters" p.7-17
"7.3.5 Firmware Installation" p.7-19
7-26
VJ-1304 Maintenance Manual