MUTOH ValueJet 1304 Service Manual page 135

VJ-1304 Maintenance Manual
4. Remove the CR board cover.
Up to step 4 in
5. Remove the CR tape wire from the CR board.
6. Remove the screw retaining the bearer mounting material and the bearer fixing material (tapping screw
×
M 3 8, S tight cup: 2) (M3
1
2
7. Remove the bearer mounting material and the bearer fixing material.
(2) Replacing Ink Tube
1. Loosen the joint screw (M6) connecting the ink tube and the F branch.
1
2
CS9050, CS9150
"4.6.1 Replacing Print Head" p.4-56
×
8, P tight cup: 1).
4-87
4 Parts Replacement
No. Part name
1 Bearer mounting material
2 Bearer mounting material
×
screw (M3 8, S tight)
3 Screw retaining the bearer
fixing material (M3
tight)
4 Bearer fixing material
No. Part name
1 Joint screw (M6)
2 F branch
×
8, P
Rev.-01