MUTOH ValueJet 1304 Service Manual page 117

VJ-1304 Maintenance Manual
8. Remove the maintenance base 1 rear part-retaining screw (tapping screw M3
9. Hold the maintenance base 1 up and rotate it to remove as shown below.
10. To reassemble the unit, reverse the removal procedure.
CS9050, CS9150
No.
1 Maintenance base 1-retaining
screw (tapping screw M3
tight cup)
2
Maintenance base 1
4-69
4 Parts Replacement
×
6, S tight cup: 2).
Part name
×
6, S
Rev.-01