MUTOH ValueJet 1304 Service Manual page 76

4 Parts Replacement
Table 4-3 Connectors to HEATER CONT board assembly (Continued)
No. Connector # of
No. pins
13 J14 -
14 J15 -
15 J16 -
16 J17 -
17 J18 -
18 J19 8
19 J20 -
20 J21 -
21 J22 2
22 J23 2
3. Replace the following parts;
AC cable assembly between CNT - RLY
Tape wire between CNT - RLY
DC cable assembly between MAIN - CNT
Serial cable between MAIN - CNT
AC cable between CNT - Power unit
DC cable between CNT - Power unit
4. Remove the HEATER CONT board bracket-retaining screw (tapping screw M3
remove it.
Rev.-01
CS9050, CS9150
Color
- -
- -
- -
- -
- -
White Main board assembly
- -
- -
White Terminal block
White HEATER RELAY
No.
1 HEATER CONT board bracket
2 HEATER CONT board bracket-retaining screw
(tapping screw M3
4-28
VJ-1304 Maintenance Manual
Connect to
Unused
Unused
Unused
Unused
Unused
Connected to J46 by using
power cable assembly between
MAIN - CNT.
Unused
Unused
AC cable between terminal
block and CNT
AC cable assembly between
CNT - RLY
Part name
×
6, S tight cup)
Remarks
×
6, S tight cup: 4), and