MUTOH ValueJet 1304 Service Manual page 150

4 Parts Replacement
1. Detach the AC cable assembly and the DC cable assembly from the connector to the power board
assembly (of take up unit section for foreign use).
1
3
2. Remove the screws (round head spring screw finishing M 4
cover on the hexagon spacer.
2
3
3. Detach the hexagon spacers (4 pieces) from the power board assembly.
4. Detach the power board assembly (of take up unit section for foreign use) from the board chassis.
5. To reassemble the unit, reverse the removal procedure.
Rev.-01
CS9050, CS9150
2
1
2
4-102
VJ-1304 Maintenance Manual
No. Part name
1 Power board assembly (of take
up unit section for foreign use)
2 AC cable assembly
3 DC cable assembly
×
8: 4 pieces) that retain the power supply
No. Part name
1 Power supply cover
2 Screws that retain the power
supply cover (round head spring
screw finishing M 4
3 Hexagon spacer
×
8)