MUTOH ValueJet 1304 Service Manual page 80

4 Parts Replacement
1. Remove the following connector from the power board assembly.
No. Connector No. # of pins Color
1 CN301 -
2. Remove the following connector from the HEATER-CONT board.
Table 4-6 Connectors to HEATER-CONT Board Assembly
No. Connector No. # of pins Color
1 J22 -
3. Remove the fuse-side two screws (pan head small screw M4
cable assembly, and remove the assembly.
Rev.-01
CS9050, CS9150
Table 4-5 Connectors to Power Board Assembly
Connect to
White Main board assembly
Connect to
White Terminal
4-32
VJ-1304 Maintenance Manual
Remarks
Connected to J1 by using DC cable
assembly.
Remarks
Connected to terminal block by
using Terminal block to CNT AC
cable assembly
×
6) retaining Fuse to terminal block AC
No. Part name
1 Fuse to terminal block AC cable
assembly
2 Screws retaining Fuse to
terminal block AC cable
assembly to fuse holder
(pan head small screw M4
×
6)