Starting Up - MUTOH ValueJet 1304 Service Manual

VJ-1304 Maintenance Manual
5.2.2

Starting Up

To use the self-diagnosis function, you must first call up the self-diagnosis menu on the operation panel.
The self-diagnosis menu is completely independent of the normal operation mode and self-diagnosis display
mode. To call up the self-diagnosis menu, follow the steps below.
1. If the system is in the operation mode or the self-
diagnosis menu mode, press [Power] key to turn
the printer off.
2. While holding down [Setting/value -] key,
[Setting/value +] key and [>] key in the operation
panel simultaneously, press [Power] key.
The system will enter the self-diagnosis mode
and display the self-diagnosis menu.
CS9050, CS9150
5-5
5 Self-Diagnosis Mode
Rev.-01