MUTOH ValueJet 1304 Service Manual page 201

VJ-1304 Maintenance Manual
If Bi-D is selected, the parameter input process is as shown below.
(The following shows a case for "Bi-D 240 - Setup" is selected.)
[>] key
[>] key
NOTE
The default value is set a proper one so that genuine ink works fine.
CS9050, CS9150
[<] key Press [Setting/Value+] or [Setting/Value-] key
to change unit to pulse
1 pulse = 1/2880 inch
[<] key
Pulse range: -400
Back to Uni D/Bi-D Top menu
5-41
5 Self-Diagnosis Mode
400
Rev.-01