MUTOH ValueJet 1304 Service Manual page 20

1 Safety Instructions
Pay attention to the following points, while handling power cable.
• Do not do anything forcefully on the power cable.
• Do not keep heavy objects on the power cable.
• Do not bend, twist or pull the power cable by force.
• Do not route the power cable near heating appliances.
Pay attention to the following points while handling power supply plug. Any
mishandling of the power cable could cause a fire.
• Make sure that no foreign substances such as dust etc. are stuck to the power
plug.
• The power plug is firmly inserted to the edge of the power socket.
Be careful not to pinch your fingers when opening/closing the front cover or
maintenance cover.
While handling ink cartridge, pay attention so that the ink does not get into eyes or
stick to the skin. If the ink gets into the eyes or sticks to the skin, immediately wash
it off with water. It might possibly cause irritation and light inflammation of eyes. In
case of any abnormality, consult a physician immediately.
Do not disassemble ink cartridges. If disassembled, there is a possibility that the ink
might come into contact with eyes or skin.
Do not operate the media loading lever during initial operation. The carriage portion
may touch the pressurizing roller portion causing a malfunction.
Do not touch the media guide during printing. It is hot and may cause a burn.
Be careful that your fingers are not caught in the driven section of the winding unit.
Pay attention to the following points when you cut roll media. Mishandling the razor
blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
Do not apply Jetwash, thinner, benzine, or alcohol to the printer parts, excluding
listed below. Such use may result in printer malfunction
• Inside the maintenance cover
• Surface of the print head
Be careful that moisture does not enter the printer. There is a possibility that electric
circuit inside the printer is short circuited.
Rev.-01
CS9050, CS9150
1-6
VJ-1304 Maintenance Manual