MUTOH ValueJet 1304 Service Manual page 303

VJ-1304 Maintenance Manual
No.
1
2
3
4
NOTE
If the temperature sensor has a problem and cannot display the monitored information, thermistor
temperature information displays "20
CS9050, CS9150
Description
Displays the information of following functions concerning
pre-heater, platen heater, and after heater (top to bottom)
• Print temperature
• Wait temperature
• Wait time over setting
• Thermistor 1 - 4
* Each value is displayed in both C (Celsius) and F
(Fahrenheit). "AD" is reference information for developers.
Turns to green when thermistor temperature reaches the set
value.
Stops monitoring.
Turns to green when temperature reaches set value and
starts printing.
° °
C (68 F )", which is the default value.
7-57
7 Adjustment
Rev.-01