MUTOH ValueJet 1304 Service Manual page 401

VJ-1304 Maintenance Manual
Table 9-11 Symptoms, Check Items, and Actions for Online Function Problems (Continued)
No. Event/symptom
3 Mirror function does
not work correctly.
4 Other functions do not
work correctly.
5 Printing position is
incorrect.
CS9050, CS9150
Check item
2. Program ROM may be
defective.
3. Main board assembly
may be damaged.
1. Is CW adjustment
inappropriate?
2. Is adjustment of top/
bottom margin
distance inappropriate
between front sensor
and head and between
cutter and head?
3. Printer driver may be
defective.
4. Program ROM may be
defective.
5. Main board assembly
may be damaged.
9-63
Action
Update firmware.
Replace main board
assembly.
Perform adjustment.
Perform adjustment.
Update printer driver.
Update firmware.
Replace main board
assembly.
9 Troubleshooting
Reference
"7.3.5
Firmware
Installation"
p.7-19
"4.3.3
Replacing
Main Board
Assembly"
p.4-26
"5.7.6 Uni-
D / Bi-D Low
and High
Adjustment"
p.5-36
"7.12.2
P_REAR
Sensor
Adjustment"
p.7-83
Operation
Manual
"7.3.5
Firmware
Installation"
p.7-19
"4.3.3
Replacing
Main Board
Assembly"
p.4-26
Rev.-01