MUTOH ValueJet 1304 Service Manual page 87

VJ-1304 Maintenance Manual
(2) Replacing Inlet Assembly
1. Remove the inlet assembly-retaining screws (round head spring screw (finishing) M3
1
2
2. Remove the connectors from the inlet assembly.
3. Remove the Inlet fixing board.
2
4. Replace the inlet assembly
5. To reassemble the unit, reverse the removal procedure.
TIP
When installing the inlet assembly, match the corresponding color connectors.
CS9050, CS9150
.
3
.
1
4-39
4 Parts Replacement
No. Part name
1 Inlet assembly connector
2 Inlet assembly
3 Inlet assembly screw
(round head spring screw
×
(finishing) M3 10)
No. Part name
1 Inlet assembly
2 Inlet fixing board
×
10: 2).
Rev.-01