Replacing Cleaner Head (Cleaning Wiper) - MUTOH ValueJet 1304 Service Manual

VJ-1304 Maintenance Manual
5. Attach the maintenance base 1 to where it is.
6. To reassemble the unit, reverse the removal procedure.
4.7.3

Replacing Cleaner Head (Cleaning Wiper)

NOTE
Before replacing the cleaner head, remove the following covers.
• R side cover: "4.2.1 Removing R Side Cover" p.4-6
1. Remove the cleaner head from the cleaner head by using tweezers, and lift it from the holder upward.
NOTE
To remove the wiper, use the tweezers to unhook the lower hook of the wiper.
2. Replace the cleaner head.
3. To reassemble the unit, reverse the removal procedure.
CS9050, CS9150
No.
1
2
1
Hook
4-71
4 Parts Replacement
Part name
Pump cap assembly
Cleaning wiper
Rev.-01