Choosing A Place For The Printer - MUTOH ValueJet 1304 Service Manual

3 Specifications
3.5

Choosing a Place for the Printer

WARNING
• Do not place the printer in a location under the following conditions. Doing so may cause
the product to fall, become damaged, or cause injury.
• Unstable surfaces
• Slanted areas
• Locations that are subject to vibration from other product
• Do not stand on the printer or place any heavy objects on it.
Doing so may cause it to fall over, become damaged, or cause injury.
• Do not cover the ventilation hole of the printer with cloth, such as a blanket or table cloth.
Doing so could prevent the printer from ventilating and cause fire.
• Keep the printer away from humid and dusty areas. Failure to do so may result in
electrical shock or fire.
(1) Installation Environment Requirements
Choose a place for printer installation following the requirements of the table below.
Table 3-1 Installation Environment Requirements List
Floor loading capability
Electrical Voltage
specifications
Frequency
Capacity
Environmental conditions
Operation
environment
Plotting accuracy
warranty range
Rate of change
Rev.-01
CS9050, CS9150
2940Pa (300kgf/m ) or over
2
AC 90 V - 120 V ± 10%
50/60Hz ± 1Hz
10A or more
Temperature
20º C (68F) to 32ºC (86F)
22ºC (71.6F) to 30ºC (86F)
2ºC/hour or less
3-6
VJ-1304 Maintenance Manual
Humidity
40% to 60%, with no condensation
40% to 60%, with no condensation
5%/hour or less