Replacing Heater And Thermistor Assembly - MUTOH ValueJet 1304 Service Manual

4 Parts Replacement
4.4.4

Replacing Heater and Thermistor Assembly

(1) Replacing After-heater
1. Remove the media guide F.
"4.2.7 Removing Media Guide F" p.4-14
2. Remove the connectors from both AFT_H relay assembly and AFT_T relay assembly.
3. Remove the after-heater and thermistor.
1
4. To reassemble the unit, reverse the removal procedure.
NOTE
Wipe the grease away from the heater attachment area before installing it.
(2) Replacing Pre-heater
1. Remove the media guide R2.
"4.2.8 Removing Media Guide R2" p.4-15
2. Remove the connectors for PRE_H relay assembly and PRE_H2 relay assembly.
NOTE
Replace the pre-heater while media guide R1 is attached to the printer.
Rev.-01
CS9050, CS9150
No.
1
2
2
4-44
VJ-1304 Maintenance Manual
Part name
After-heater
Thermistor assembly