MUTOH ValueJet 1304 Service Manual page 43

VJ-1304 Maintenance Manual
Item
CPU
Memory
Command
Interface
After-heater
Platen heater
Pre-heater
Ink Supply method
Cartridge
Head life expectancy
Operation environment
Plotting accuracy warranty range
Rate of change
Storage Without ink
environment
With ink
Power source Voltage
Frequency
Power During Plotting
consumption
During standby
Outer dimensions Height
Width
Depth
Weight Main body
Stand
CS9050, CS9150
Specifications
64Bit RISC CPU
MH-RTL (RTL-PASS)
Network Interface (IEEE802.3)
OFF / 30 to 50
OFF / 30 to 50
OFF / 30 to 50
Tube supply from separate four separated cartridges
Black, cyan, magenta, yellow: 220ml ± 5ml for each color
×
6 10 (6 thousand million) dots per nozzle (in case of sequence discharging
9
under the condition of the temperature of 25
Temperature: 20ºC (68F) to 32ºC (90F)
Humidity: 40% to 60%, with no condensation
Temperature: 22ºC (71.6F) to 30ºC (86F)
Humidity: 40% to 60%, with no condensation
Temperature: 2ºC/hour or less
Humidity: 5%/hour or less
Temperature: -20ºC (-4F) to 60ºC (140F)
Humidity: 20% to 80%, with no condensation
Storage period: 6 months
Temperature: -10ºC (14F) to 40ºC (104F)
Humidity: 20% to 80%, with no condensation
Storage period: 6 months
AC 90 - 132V ± 10%
50Hz/60Hz ± 1Hz
1260W or less (when hearter is ON)
40W or less (when standby hearter is OFF)
1218mm (48 in.) * including stand
1875 mm (73.8 in.)
58.0 kg (127.8 lb.)
3-3
3 Specifications
128MB
°
C (86 to 122F)
°
C (86 to 122F)
°
C (86 to 122F)
º
C (77F) with no dust)
685 mm (27 in.)
21.3 kg (46.9 lb)
Rev.-01