Maintenance; Introduction - MUTOH ValueJet 1304 Service Manual

8 Maintenance

8.1 Introduction

This chapter provides information about the periodical services, part life, lubrication/bonding, and transport.
WARNING
Before starting any maintenance work, always perform the following operations.
• Turn the printer. power OFF.
• Remove the power cable from the power outlet.
Not doing so may cause electric shock or damage to the electric circuit.
• Unplug the cables connected to the printer.
Failure to do so could result in damage to the printer.
CAUTION
• Make sure there is sufficient space around the printer when performing maintenance
work.
• When servicing the machinery inside with some covers removed, pay special attention
not to be injured by the driving mechanisms.
• Maintenance must be done by more than two person for the following work.
• When disassembling or reassembling the printer and the optional stand
• When packing the printer for transportation
Rev.-01
CS9050, CS9150
8-2
VJ-1304 Maintenance Manual