MUTOH ValueJet 1304 Service Manual page 330

7 Adjustment
7. Adjust the P_REAR sensor adjusting volumes as shown below so that the value displayed in the operation
panel becomes "216 ± 10".
Counterclockwise: Sensitivity increases
Clockwise: Sensitivity decreases
• Trimmer R371: Rough adjustment
• Trimmer R373: Fine adjustment
8. Check that the value displayed in the operation panel is "216 ± 10".
9. Remove the standard media.
10. Check that the value displayed in the operation panel is "80" or below.
Rev.-01
CS9050, CS9150
1 2
No. Part name
1 Trimmer R371
2 Trimmer R373
7-84
VJ-1304 Maintenance Manual
Main board