MUTOH ValueJet 1304 Service Manual page 250

7 Adjustment
Part replaced or Adjustment
adjusted
Main board
assembly
CR motor assembly
Rev.-01
CS9050, CS9150
Table 7-1 Adjustment Item List (Continued)
Adjustment item
order
1 Parameter backup
2 Firmware installation
3 Voltage input (no need for initial ink
charge)
4 Head nozzle check
5 Uni-D / Bi-D Low Adjustment
Uni-D / Bi-D High Adjustment
6 Side margin adjustment
7 P_REAR sensor position adjustment
8 Media sensor sensitivity adjustment
9 Test printing
1 CR belt tension adjustment
2 Uni-D / Bi-D Low Adjustment
Uni-D / Bi-D High Adjustment
3 Side margin adjustment
4 Test printing
7-4
VJ-1304 Maintenance Manual
Reference
"7.3.1 Parameter
Backup" p.7-10
"7.3.5 Firmware
Installation" p.7-19
"(1) Head Rank"
p.5-57
"5.7.2 Head Nozzle
Check Menu" p.5-26
"5.7.6 Uni-D / Bi-D
Low and High
Adjustment" p.5-36
"5.7.7 Side Margin
Adjustment Menu"
p.5-42
"7.12.2 P_REAR
Sensor Adjustment"
p.7-83
"7.12 Media
Sensor Sensitivity
Adjustment" p.7-79
"5.7.8 Test
Printing Menu" p.5-43
"7.7 CR Belt
Tension Adjustment"
p.7-70
"5.7.6 Uni-D / Bi-D
Low and High
Adjustment" p.5-36
"5.7.7 Side Margin
Adjustment Menu"
p.5-42
"5.7.8 Test
Printing Menu" p.5-43