Replacing Take Up Unit; Removing Tension Arm - MUTOH ValueJet 1304 Service Manual

VJ-1304 Maintenance Manual

4.12 Replacing Take Up Unit

This section describes the procedure to replace the Take Up unit.
NOTE
Have two or more people to replace the part of take up unit.

4.12.1 Removing Tension Arm

1. Remove the two screws (hexagon socket pan flat head M4
2. Remove the tension arm L from tension fulcrum shaft.
1
2
3. Remove the tension arm.
4. To reassemble the unit, reverse the removal procedure.
CS9050, CS9150
×
8) retaining tension arm R.
No.
1
2
2
1
No.
1
2
4-93
4 Parts Replacement
Part name
Tension arm R
Screw that retains the Tension
arm R (hexagon socket pan flat
×
head M4 8)
Part name
Tension arm L
Tension fulcrum shaft
Rev.-01