Replacement Of Maintenance Section Components; Removing Maintenance Base Assembly - MUTOH ValueJet 1304 Service Manual

4 Parts Replacement

4.7 Replacement of Maintenance Section Components

4.7.1

Removing Maintenance Base Assembly

NOTE
• When replacing the parts inside the maintenance assembly, make sure to clear the following
counter parameters.
• "Waste Ink" or "Cleaning":
• Before replacing the parts in the pump cap assembly, remove the following parts.
• R side cover:
• Ink holder cover:
• Scroller receiver:
1. Enter "CR maintenance confirmation" mode using operation panel, then turn the printer power off.
Confirm that the cleaner head is positioned in the front side.
"Operation
Manual"
Rev.-01
CS9050, CS9150
"6.3.1 Counter Display Menu" p.6-4
"4.2.1 Removing R Side Cover" p.4-6
"4.2.4 Removing Ink Holder (I/H) Cover" p.4-11
"4.2.9 Removing Scroller Receiver (L, R)" p.4-16
4-66
VJ-1304 Maintenance Manual
No. Part name
1 Pump cap assembly
2 Cleaner head
1